Главная Other productsMechanical Load Test Bench

Mechanical Load Test Bench

  • Work area size*
    up to 2000x1000 mm
  • Module position
    horizontal, rigid fixation
  • Number of independently controlled groups
    2 rows of 5 groups
  • Applied pressure range
    1000 – 7200 Pa** 1000 – 5400 Pa***
  • Minimum cycle time
    10 sec.
  • Maximum amount of cycles
    10 000
  • Dimensions (Length * Width *Height)
    2390х1798х2680 mm
  • Weight
    700 kg
  • Warranty
    12 months
  • *One panel
  • **Pressing
  • ***Drawing
The bench is intended for photovoltaic modules testing for mechanical loads impact in accordance with the requirements of the following standards:
GOST R 56980-2016 (IEC 61215:2005), GOST R IEC 61646-2013, IEC 62759-1:2015, IEC 61215-2:2016, IEC/TS 62782:2016, IEC 61730-2:2016.

General Info

  • Serial number
    SIMN-1/10
  • Manufacture date
    31.12.2018
  • Weight
    700 kg
  • Control unit weight
    maximum 105 kg
  • Dimensions*
    2390** х 1798 х 2680 mm
  • Open Circuit Voltage (Vос)
    52,26 V
*Length * Width *Height
**3040 mm including electrical cabinet

Mechanical Load Control

  • Work area size*
    up to 2000x1000 mm mm
  • Number of independently controlled groups
    2 rows of 5 groups
  • Applied pressure range
    1000 – 7200 Pa* 1000 – 5400 Pa**
  • Minimum cycle time
    10 sec.
  • Maximum amount of cycles
    10 000
  • Pressure heterogeneity along module area
    10% maximum %
  • Pressure maintenance accuracy
    ± 5 %
  • Pressure presentation accuracy
    ± 5 %
  • Strain gauge signal meter
    MV110-224.1TD
  • Strain gauge
    Zemic H3-C3-200kg-3B-D41
  • Strain gauge sensitivity
    2 mV / 2V
*Pressing
**Drawing

Service Conditions

  • Environmental temperature, °С
    from + 5 to + 35
  • Relative air humidity
    up to 60 %*
  • Power supply
    220 ± 5 V with 50 ± 0,5 Hz
  • Pneumatic system operating pressure
    0,6 – 0,9 MPa
  • Compressed air consumption under 0.6 MPa pressure 0,6 MPa
    250 l/min
  • Compressed air
    Class 7 as per GOST 17433-80**
*at temperature of +20°С
**content of solids under 40 µm is 4 mg/m3 maximum, water and oil content is not allowed

Customer Reviews (0)

Submit your feedback

Write your feedback

Submit your feedback about product and it might help other Customer to make a choice

(0)